ICP Electronics ROCKY-P288EV Manual Download | Manualshive

Page: 1 / 41

background image

ROCKY – P288EV

Dual Pentium® II, III with

LAN & AGP VGA SBC

Ver 1.x

@Copyright 1999

All Rights Reserved.
Manual first edition November 15,1999

The information in this document is subject to change without prior notice in
order to improve reliability, design and function and does not represent a
commitment on the part of the manufacturer.

In no event will the manufacturer be liable for direct, indirect, special,
incidental, or consequential damages arising out of the use or inability to use
the product or documentation, even if advised of the possibility of such
damages.

This document contains proprietary information protected by copyright. All
rights are reserved. No part of this manual may be reproduced by any
mechanical, electronic, or other means in any form without prior written
permission of the manufacturer.

Trademarks

ROCKY-P288EV is registered trademarks of ICP Electronics Inc., IBM PC is
a registered trademark of International Business Machines Corporation. Intel
is a registered trademark of Intel Corporation. AMI is registered trademarks of
American Megatrends, Inc. Other product names mentioned herein are used
for identification purposes only and may be trademarks and/or registered
trademarks of their respective companies.

Support

Any questions regarding the content of this manual or related issues can be e-
mailed to us directly at :

[email protected]

StockCheck.com

1
2
3
...
»

Summary of Contents for ROCKY-P288EV










































Reviews:

No comments

Related manuals for ROCKY-P288EV

Brand: Radxa Pages: 14

Wind Top AE2712 Series

Brand: MSI Pages: 91

iW-RainboW-G23S

Brand: iWave Pages: 51

iW-RainboW-G33M

Brand: iWave Pages: 58

iW-RainboW-G22M

Brand: iWave Pages: 62

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands