![background image](http://html1.mh-extra.com/html/icolor/600/600_quick-start-manual_611034001.webp)
1. Remove the packing materials
and check the components.
2. Open the front door and top lid of the printer.
4. Install the Uninet IColor Printer Driver
.
•
Insert the provided USB Flash drive, and select “Uninet IColor Software”
NOTE:
Only connect the Printer to the PC when prompted to by the software.
6. Install the Uninet IColor TransferRIP software
A. Insert the dongle into an available USB port.
– The TranferRIP software is located on still the inserted
Uninet IColor Software USB Drive.
B. When prompted, enter the Update Code.
– Your code is in a text file on the UniNet iColor Software USB Drive.
– Please copy and paste the entire string of code.
C. The date below will automatically populate.
D. Then select “Close”.
5. Connect the power cord and USB cable to the printer.
Power on the printer.
www
.icolor
print.com
3. Remove orange security tape, protective sheet and packing material from around the printer.
A. Remove the toner and drum cartridges and remove the protective orange tape and protective sheeting from each.
B. Lock the blue lever forward.
C. Reinstall the cartridges.
* Please note the blue handle on the white cartridge is already in the locked position *
• Do Not Remove After Installation
Quick Start Guide
For detailed instructions please refer to the Uninet IColor 600 Printer User Manual
and the Uninet IColor TransferRIP User Manual
Digital Color + White Transfer Printer
Digital Color + White Transfer Printer