background image

IBM NetVista 

First Edition (September 2001) 

 

The following paragraph does not apply to any state or country where such provisions are 
inconsistent with local law: INTERNATIONAL BUSINESS MACHINES CORPORATION 
PROVIDES THIS PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER 
EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. 
References to IBM products, programs, or services do not imply that IBM intends to make 
them available outside the United States. 
This publication could contain technical inaccuracies or typographical errors. Changes are 
periodically made to the information herein; these changes will be made in later editions. 
IBM may make improvements and/or changes in the product(s) and/or program(s) at any 
time. 
 
Request for copies of this publication and for technical information about IBM products 
should be made to your IBM Authorized Dealer, your IBM Marketing Representative or 
your IBM Retailer. Address comments about this publication to the IBM HelpCenter. 
 

© 

Copyright International Business Machines Corporation 2001. All rights reserved. 

Note to U.S. Government Users – Documentation related to restricted rights – Use, 
duplication or disclosure is subject to restrictions set forth in GSA ADP Schedule Contract 
with IBM Corp. 
 

 
Trademarks 
 

The following terms are trademarks of the IBM Corporation in the United States or other 
countries or both; 
 
HelpCenter 
HelpWare 
IBM 
Update Connector 
Netfinity 
Netfinity Manager 
NetVista 
OS/2 
PC300 
Wake On LAN 
 
Intel, Celeron and Pentium are trademarks of Intel Corporation in the United States and/or 
other countries. 
 
Microsoft, MS-DOS, Windows, Windows 98, Windows Me, Windows NT, Windows 2000 
and Windows XP are trademarks of Microsoft Corporation in the United States and/or other 
countries. 
 
Other company, products, and service names may be trademarks or service marks of 
Others. 

 

   

1/

53 

Summary of Contents for NetVista 6049






















































Reviews: