IBM Security Hardware
GX7 Series Hard Disk Drive Replacement Instructions
The instructions in this document support the following appliance models:
Product
Model
IBM
®
Part Number
IBM Security Network Intrusion
Prevention System (IPS)
GX7412
46N5360
GX7412-05
46N5621
GX7412-10
46N6518
GX7800
46N5361
Important:
Before you proceed with these instructions, review the
IBM Systems Safety Notices
provided in
the
IBM Media Terms and Conditions CD
that is included with your appliance model.
Note:
The illustrations in this document might differ slightly from your appliance model.
Identifying the hard disk drive
The front panel of the appliance contains the hard disk drives, as highlighted in yellow in Figure 1.
Procedure
Complete the following steps to replace a failed hard disk drive:
1.
Make sure that you have the applicable replacement drive before you remove and replace the failed
drive.
2.
Slide the lock for the drive carrier to the left to unlock it.
3.
Pull the lever to the right to pull the carrier from the drive bay, as shown in Figure 2 on page 2.
Figure 1. Location of the hard disk drives on the front of the appliance