DYNAMIC /X8
PLUMBER’S CONDENSED
INSTALLATION GUIDE
SUPPLIED CONTENTS
Welcome to the future of hot water.
OWNER’S MANUAL
DYNAMIC /X8
OWNER’S
MANUAL
HYDROTHERM UNIT
1. LOCATION SELECTION
CONDENSATE
DRAINAGE
ELBOW (connected)
150mm
600mm
300mm
FRONT SIDE
LEFT SIDE
150mm
2. BASE
PTR
C
lear
anc
e R
equ
irements
300mm
• This unit is designed for external operation only and requires a continuous supply of air to operate efficiently.
• Avoid installation in areas where falling debris, such as leaves, is prevalent as this may result in air vents being
blocked or the unit being damaged.
• Avoid placing the system in locations with multiple walls or structures.
• Always maintain optimum perimeter from all structures.
• The unit should be installed on a concrete plinth or stable structure capable of sustaining weights in excess of
450kg.
• A minimum dimension of 600mm x 600mm is required. Please ensure that all four feet are supported by the
base being used otherwise warranties may be voided.
• The system is to be installed level to ensure that the condensation drainage is not impaired.
pg.1