HydroCare Dual Action Water System
Installation, Use & Care Guide
Parts & Material Included
A.
2 Canisters w/ Inserts
H.
2 John Guest Males
O.
Wall Mount Bracket
B.
Canister w/ Pre-filter Insert
I.
2 John Guest Females
P.
Inlet Pipe Assembly
C.
3 Canister Heads
J.
2 John Guest Adapters
Q.
Iron to DAWS Pipe Assembly
D.
6 SharkBites®
K.
Teflon Tape
R.
Outlet Pipe Assembly
E.
Pipe Thread Compound
L.
¼” Red Tube
S.
6 Wall Mount Screws
F.
Silicon
M
. ¼” Blue Tube
T.
SharkBite® Removal Tool
G.
12 Lag Bolts
N.
HydroCare
U.
Canister Wrench
The HydroCare Dual Action Water System is the result of the finest
craftsmanship and the highest quality materials available. Its design
and manufacture is based on a unique modular concept which provides
higher quality water and higher flow rates while using less space and
less cost per gallon of water produced than conventional systems. The
pipe size is 1” throughout the entire unit and will adapt to household
plumbing with the use of a simple slip–on compression fitting. The
fittings recommended are available at most hardware stores and will
easily slip onto the following pipe types: PEX, Copper, or CPVC.
Other pipe types can also be adapted to the HydroCare Dual Action
Water System with the use of an additional adapter. These fittings are
available at most hardware stores. Installation must comply with any
existing state or local plumbing codes.
