HDYR100/150 Inst Issue 2: 30.09.2009
Installation and Maintenance Instructions
THESE INSTRUCTIONS MUST BE READ FULLY BEFORE
COMMENCING INSTALLATION
HDYR100 & HDYR150 Hair Dryer
Code
Supply
Watts
Amps
HDYR100
220-240V/1Ph/50Hz
1000
4.3A
HDYR150
220-240V/1Ph/50Hz
1500
6.8A
Parts:
1. LCD Screen
2. Button
3. Micro Switch
4. Panel
5. Shaver Socket
6. Base
7. Air Outlet Handle
1.0
GENERAL
1.1 It is important these Installation and Maintenance Instructions are fully adhered to.
1.2 Full details of the unit supplied are shown on the product nameplate. If in doubt about any detail
contact HYDOR or its agents for clarification.
1.3 All electrical installation must be carried out by suitably qualified and competent personnel in
accordance with all current statutory requirements.
1.4 Any declarations made by HYDOR about product installation and safety, are dependant on the hair
dryer being used within installations which themselves meet the requirements of the relevant
Standards and Directives of your region.
1.5 The hair dryer must be installed indoors in a dry, sheltered position and is designed for use in an
ambient temperature of up to 40
°
C. The hair dryer is not suitable for corrosive or explosive
atmospheres.
1.6 The installer should provide easy access to the hair dryer to facilitate future maintenance.
1.7 The installer should ensure the hair dryer is adequately supported.
1.8 This product is not intended for use by persons (including children) with reduced physical, sensory
or mental capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the product by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the product.
