1
Assembly, Installation, Operation and
Maintenance Instructions
P/N: 33094
Ford F350 SD 4 Bolt Custom
Installation Bracket Kit.
Use with 10 bolt 30686 base rails ONLY. Base Rails are not included with this kit.
Hardware Torque Values:
5/8” to 150 lb-ft
Do NOT use with base rail # 31323.
Center Bolt Kit 32059 must be used
when towing with 26K hitch, Goose Neck
or a Maneuvering System (not included).
Figure: 1
Caution:
You must remove backing paper on rubber insulator pads to properly install. Once backing paper is
removed and the rubber pads are installed; it is PERMANENT and cannot be removed. ONLY remove backing
paper and install to the brackets and base rails. DO NOT install rubber insulator pads directly to the truck bed.
TOOLS
3/16 drill
1-
5/16” Circular Hole Saw
15/16" Socket & Open End
Wrench
Torque Wrench
Parts Diagram
Dealer /
Installer:
Provide a copy of these Instructions to the end user of this product. These Instructions provide important
operating and safety information for proper usage of this product. Demonstrate the proper use of the
product with the end user. Have the end user demonstrate that they understand the proper use of the
product.
End User:
Read and follow all instructions included in this manual. Ask your Dealer / Installer for assistance if you do
not understand the proper use of the product. Never remove any decals from the product.
WARNING!
Never exceed the
towing capacity of the tow vehicle.
All Products limited to Vehicle Tow Rating, see Vehicle Owners Manual. Visit www.huskytow.com for Warranty
Information / Tech Support / Product Updates. ©2018 LKQ SPG. All Rights Reserved. June. 26, 2019-REV7
