H3 2 pc plastic cover instr
Hummer H3 Spare Tire Cover Installation
Thank you for the purchase of your new Hummer H3 spare tire cover. Please inspect your package contents
before beginning installation. Shown below is a list of installation hardware, faceplate, base plate and quantities:
Faceplate (1) Base Plate (1)
Latch Assembly and Insert Installation:
1.
Install latch insert and latch to the spare tire base plate with screw, through the front side of an open latch,
into the predrilled holes on the base plate, and finally through the latch insert (textured side against base
plate). Fasten with a washer and nut using a flat head screwdriver and 5/16” wrench (fig 1). Repeat this
installation on each of the 4 notched and predrilled locations on the tire base plate (fig 2).
Latch (4)
Catch (4)
Latch
Insert (4)
Catch
Insert (4)
Washer
(16)
Nut
(16)
Screw
(16)
Key (1)
