REV 08 October`10
max 1000 mm
Install the roller blind. Level the side guiding chan-
channel against the bottom of the end cap. Mark the
drilling positions.
Type SCG 64
Fix the side guiding channel (with provided screws)
on the marked position.
Press the cover caps onto the drill holes.
Installation with screw
Installation Instruction
Roller Blind
Side Channel Guiding
Installation in recess
side guiding channels.
-
side of the bracket. Fix the channel in this position
(with provided screws).
Divide the width between both outer drill holes into
equal sections (in accordance with possibilities).
Pay attention that the maximum distance of 1000
mm between two drill holes will not be exceeded.
Distance between drill holes
