1
ICE HELIX® CHIRP SERIES
Quick Start Guide
Power On/Off
1
Power On:
Press the POWER key.
2
Select the Start-Up Mode:
Press the MENU key on
startup. Select Normal, and press the RIGHT Cursor key.
3
Quick Setup:
Use the Cursor Control key to select
settings. Press the EXIT key to close the menu.
Power Off:
Press and hold the POWER key.
Select Settings for Ice Fishing
1
Display a Sonar View:
Press the VIEW key until a Sonar view is displayed.
2
Open the X-Press™ Menu:
Press the MENU key once.
CHIRP IR (Interference Rejection) (CHIRP models only) -
If you are fishing near
other ICE flashers or transducers, use CHIRP IR to reduce interference or noise on
the sonar display.
Cone Angle (CHIRP models only) -
Select 15º for a narrowly focused down beam.
Select 21º for a wide down beam and larger coverage area. Select 15º-21º to use
the full frequency range for your transducer. CHIRP IR must be off to set the Cone
Angle.
Lower Range -
Use the default Auto depth range setting included with your control
head, or manually set the depth range.
A
B
C
532586-1_B
Power On/Off
Open the X-Press Menu
Select a Menu
Select a Setting
A
B
C
ICE_HELIX_QSG_532586-1EN_B.qxp_Layout 6 7/13/18 5:22 PM Page 1