Saionara Quick Start Guide
Revision 3 – February 2017
IMPORTANT!
Don't burn up your new coils! Set your battery box-mod to
the appropriate Wattage for your chosen coil before attaching the Saionara
atomizer assembly to the battery.
PARTS OF THE SAIONARA
1. Mouthpiece
2. Top cover
3. Atomizer base (with airflow adjustment holes)
4. Atomizer coil (screws down into atomizer base)
CHOOSING A BATTERY
In order to use the Saionara, you'll need a vaporizer battery, also known as a
“box mod”, with the following features:
* 510 female electrical connector. This is the standard connector on most
vaporizer batteries.
* Adjustable Wattage in the range of 7 to 28 Watts.
* Sub-ohm capable. This means the battery works with atomizers that
have less than one ohm of resistance. Some Saionara coils have a little as
0.25 ohms of resistance.
For multi-mode batteries, the Saionara usually works best in variable wattage
(VW) mode. Some kinds of Saionara coils may also be used in temperature
control (TC) mode on some box mods.
Some examples of batteries that are known to work with the Saionara are:
ELeaf iStick Pico 75W, Eleaf iStick Nano 40W, NME Pioneer N-75, SXK Nebula
60, Tesla Stealth 40, Vaporesso Target Mini 40W, Tesla Stealth 40 TC;
Joyetech eVic VTC Mini, Dual, and Vtwo, Cuboid 150, Itsuwa iFancy 40 and 50,
Innokin Coolfire IV series, Hana Modz v4s.
CHOOSING WHICH COIL TO USE
There are many different coil options for the Saionara. New varieties of coils
are added from time to time, so there may be some coils on the market that
aren't covered in this guide. Some of the most popular coils include the
following:
* The
Kanthal on Quartz (KQ)
or “classic wax” coil: Two flat ribbons of
kanthal wire are twisted around a quartz rod. Recommended power: 15
to 28 Watts. Recommended load size: 0.05 to 0.3 grams.
* The
Kanthal on Ceramic (KC)
or “black ceramic wax” coil: Two flat
ribbons of kanthal wire are twisted around a wicking rod of porous black
ceramic. Recommended power: 15 to 28 Watts. Recommended load
size: 0.05 to 0.3 grams.
* The
Stainless on Ceramic (SC)
coil: Two strands of SS316L wire are
wrapped around a wicking rod of porous black ceramic. Recommended
power: 10 to 18 Watts. Recommended load size: 0.05 to 0.2 grams.
* The
Miracle A (MA)
coil: Bottom-wicking eCapple ceramic barrel coil
with solid outer layer and porous inner layer. Recommended power: 7 to
15 Watts. Recommended load size: 0.025 to 0.1 grams.
* The
Miracle B (MB)
coil: Top-loading eCapple ceramic barrel coil with
solid outer layer and porous inner layer. Recommended power: 7 to 15
Watts. Recommended load size: 0.01 to 0.05 grams of solid or 2-10
drops of liquid.
*
(COMING SPRING 2017)
The
Ceramic Donut (CD)
coil: 10mm flat ceramic
disk heating element. Recommended power: 8 to 15 Watts.
Recommended load size: 0.025 to 0.1 grams.
HOW TO OPERATE THE SAIONARA
* Attach the Saionara to your battery box mod by screwing the threaded
post on the bottom of the atomizer firmly into the battery's 510
connector.
* Turn the battery on and adjust the power level to an appropriate
Wattage for the coil you will be using.
* Remove the top cap from the Saionara and make sure the coil is screwed
all the way into the atomizer base. Sometimes the coil can vibrate loose
during shipping.
* Burn Off: If the coil is brand new (never heated) press and hold the fire
button on the battery for about five seconds to burn off any residual oils.
* Load your oil into the coil: For most kinds of coils, just place your dab of
oil/wax /shatter right onto the top of the coil, near the center. For the
Miracle B coil, place your oil into the small slot on the top of the coil.
* Pre Heat: If you are using the Miracle A or B coils, press the fire button on
the battery for 1-3 seconds to begin wicking the oil into the ceramic
layers inside the coil.
* Place the top cover back onto the Saionara.
* Hit the Vape!: Raise the Saionara mouthpiece to your mouth and
prepare to inhale. Press and hold the fire button on the battery for about
5 to 10 seconds while inhaling deeply. You can adjust the inhalation time
up or down to suit your personal preference.
* Depending on the amount of oil that was loaded, you may be able to hit
the vape more than once before it needs to be reloaded with more oil.
* To adjust the airflow, grip and twist the ring at the base of the Saionara
to cover or uncover the air holes on the side of the base. More holes
visible means more air.
CLEANING THE SAIONARA
* Detach the Saionara from the battery.
* Remove the mouthpiece, top cover, and coil from the Saionara atomizer
base.
* Remove the rubber o-rings from the atomizer base and mouthpiece.
* Pour several ounces of 99% isopropyl alcohol into a cup or bowl.
* Submerge everything (except the battery and o-rings) into the alcohol
and let soak for several hours.
* Shake off any excess alcohol and let the pieces air dry for about an hour.
* Reassemble and enjoy.
The Saionara vaporizer for essential oils
Designed by Crossing California
Manufactured by Shenzhen Crossing
Distributed by Humboldt Vape Tech
USA Sales and Support:
[email protected] - 844-OIL-COIL
www.HumboldtVapeTech.com
