background image

INTRODUCTION

Thank you for purchasing the Symmetry IQ product.  This product is intended for use by dental  
professionals only.  This device generates ultrasonic vibrations intended for use in dental applications  
such as scaling, periodontal therapy, root canal treatment and cavity preparation. Read this operation  
manual carefully before use and retain for reference.

PRODUCT FEATURES AND BENEFITS

• Compact, lightweight device.

• Three color-coded selectable and adjustable pre-defined power modes for a variety of dental procedures.

• Easy to read digital display for trouble-free operation.

• Convenient memory feature to store frequently used operational settings.

• Fiber-optic handpiece to enhance visibility. 

• Lightweight, large diameter handpiece encourages a light grasp to reduce operator fatigue. 

• Soft, textured silicone finger grip for clinical comfort and control. 

• Autoclavable handpiece for infection control. 

• Durable, lightweight handpiece cord.

• Two methods of irrigation are available (dental unit/city water and irrigation bottle). The selection of no  
   irrigation is also an option.

• Irrigation tube is isolated within the control unit to prevent solution from coming in contact with the  
   electronics of the unit.

• Two irrigation bottles for use with the IQ 4000 unit.

• Easy to clean design to minimize the risk of cross-contamination.

COMPONENT PARTS

  Control Unit
  Symmetry IQ Fiber-optic Handpiece
  Replacement Bulb
  Water Tube
  Symmetry IQ Fiber-optic Handpiece Cord
  Spanner Wrench (5X8) – 2 pieces
  Foot Control
  AC Power Cord
  Irrigation Connector (AC 120V Only)
  Irrigation Bottles – 2 pieces
  O-rings for irrigation bottles (not pictured)
  Tip Wear Guide (not pictured)
  Power Range Guide (not pictured)
  Three Symmetry S-Series Tips (not pictured)

1.
2.
3.
4.
5.
6.
7.
8.
9.

10.
11.
12.
13.
14.

Summary of Contents for Symmetry IQ 4000 Series






















Reviews: