Hardware Overview
LED
Power Indicator:
Steady green when power on, blinking green when the call is ringing.
Line Keys: Steady green:
During the conversation, or plan to dial a call.
Blinking red:
The call is ringing.
Off:
Idle interface.
Place a call
Three ways to make a call:
Handset:
Pick up the handset; enter the number, then press the send soft key or press
.
Speaker:
Press
or the line keys; enter the number, then press the send soft key or press
.
Headset:
Press
, enter the number, then press the send soft key or press
.
Note:
You can also use Contacts or call log to dial the number you want, press dial key and place
the call by the three ways mentioned. More, you can also alternate the mode during the call.
End a call
To end a call in three different modes:
Handset:
Hang up the handset or press the cancel soft key.
Speaker:
Press
, or press the cancel soft key.
Headset:
Press the cancel soft key.
Answer a call
Handset:
Pick up the handset.
Speaker:
Press
.
Headset:
Press
.
Note: You can also reject the call by press the Reject soft key.
Redial
Press
to redial the last call that dialed.
Call Transfer
Blind Transfer
1) Press
or transfer soft key during the conversation, the call is on hold now.
2) Enter the number that transfers to.
3) Press
or the B Transfer soft key and now the blind transfer completed.
Attended Transfer
1) Press
or transfer soft key during the conversation, the call is on hold now.
2) Enter the number that transfer to and press the send soft key or
.
3) Start the second conversation, press
or transfer soft key, then transfer completed.
Semi-Attended Transfer
1) Press
or transfer soft key during the conversation, the call is on hold now.
2) Enter the number transfer to, and then press
, then you can hear the ring tone.
3) Press
or the Tran soft key and now the Semi-attended transfer completed.
Call Conference
Assuming that A and B are in conversation. A wants to bring C (or D & E) in a conference:
1) A press Conference soft key, the call is placed on hold.
2) A enter the number of C and then press send soft key or , C answers the call.
3) A press the conference soft key, then A, B and C are now in a conference.
4) If add D&E, A press Hold soft key, the current conference is on hold, press New Call soft key and
dial D, D answer the call. A Press Hold soft key and New Call soft key and dial E,E answer the call. A
press the conference soft key, then A,B,C,D,E are in conference.
Note:
1) If C does not answer the call, A can back to continue the conversation with B;
2) Once A hangs up the call, the conference is ended, while if B or C drops the call, A&C or
A&B conversation continues.
Call Mute
Press
to mute the microphone during the call.
Press
again to un-mute the conversation.
Instruction
