INSTALLATION INSTRUCTIONS
95-7717—2
Compact I/O Module
XIO-10HUB EXTENSION MODULE
GENERAL
The Honeywell XIO-10HUB Extension Module provides
additional potential free contacts as supporting contacts to
connect digital outputs, analog outputs, etc. Six contacts each
are interconnected. A maximum of 60 volts can be applied to
the contacts. The extension module can be used as a power-
on module for bus connection, supply voltage and potential
distribution.
SPECIFICATIONS
Electrical Ratings:
Supply Operating Voltage: 10 to 28 V AC/DC.
LED Current Consumption: 0 mA (AC) / 0 mA (DC).
Load:
Nominal Current:
Bus: 2.5 A max.
Contacts: 8.0 A max.
Prefusing:
Bus: 3.0 A max.
Contacts: 10.0 A max.
Terminal Blocks:
Supply and Bus: 16 AWG (1.5 mm
2
) or 14 AWG (2.5 mm
2
)
(Terminal block and strapping plug included in packing).
Temperature Ratings:
Operating: 23° F to 131° F (-5° C to +55° C).
Storage: -4° F to +158° F (-20° C to +70° C).
Dimensions (W x H x D):
1.4 x 2.7 x 2.8 in. (35 x 70 x 71 mm).
Weight:
2.6 ounces (75 g).
Mounting Position:
Any.
Construction Material:
Housing and Terminal Blocks: Polyamide 6.6 V0.
Faceplate: Polycarbonate.
Protection:
IP40 housing DIN 40050.
IP20 terminal blocks DIN 40050.
Approvals:
UL 916, Standard for Energy Management Equipment.
European Community Mark (CE) Listed.
SAFETY INSTRUCTIONS
NOTES REGARDING DEVICE DESCRIPTION
These instructions include indications for use and mounting of
the device. In case of questions that cannot be answered with
these instructions, please consult the product supplier or
manufacturer. It is the responsibility of the equipment installer
to ensure that all federal, state and local codes are followed.
SAFETY INSTRUCTIONS
• Keep these Installation Instructions for industrial safety and
the prevention of accidents.
• Only qualified personnel shall do mounting and installation
work with these devices, see section titled “Qualified
Personnel”.
• The information in these instructions must be read and
understood by every person using this device.
QUALIFIED PERSONNEL
Qualified personnel in the sense of these instructions are
persons who are well versed in the use and installation of
such devices and whose professional qualification meets the
requirements of their work.
