background image

Operating Instructions

OPERATION

1. Check Driver Bit to make sure it is in good con-
dition.
    • If it is broken or worn out, install a new one.

2. 

IMPORTANT! 

Make sure the forward-reverse 

switch is in the forward position.

3. Insert a strip of screws into the feed track. Pull 
it through and insert the front into the index mod-
ule until the first screw is in driving position in the 
center of the nose piece. See Figure 1.

FIGURE 1.

4. Adjust the nosepiece so there is a 1/8” to 1/4” 
gap between nose piece and tip of screw.
        •  Tighten  the  nosepiece  screw  securely.  See 
Figure 2.

5. Follow instructions on the sticker.  Push slider in 
to adjust.  Then turn knob until it locks.

FIGURE 2.

FIGURE 3.

6.  Turn  on  the  motor  before  starting  to  drive 
screws.
    • The motor can be locked to the ON position.

HITACHI SuperDrive Auto-feed Screw System

WARRANTY

HITACHI SuperDrive tools and system components are warranted to the original purchaser at retail to be free from defects 

in material and workmanship one year from the date of purchase.

The warranty shall only cover defects and not normal wear and tear, which occurs with use.

HITACHI  SuperDrive  assumes  no  responsibility  whatsoever  for  malfunctions,  failures  or  defects  resulting  from  misuse, 

abuse, neglect, alteration or modification. SuperDrive makes no warranty and shall not be liable as to the fitness of its tools 

or fasteners for any particular uses or applications. No other warranties, representations or promises as to the quality or 

performance of the SuperDrive fastening tool other than those contained herein are made.

ANY IMPLIED WARRANTY GRANTED UNDER STATE LAW, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS 

FOR A PARTICULAR PURPOSE, ARE LIMITED TO DURATION TO THE EXPRESS WARRANTY GRANTED HEREUNDER. SUPER-

DRIVE IN NO EVENT SHALL BE LIABLE FOR DIRECT, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, SO THE 
ABOVE LIMITATIONS AND EXCLUSIONS MAY NOT APPLY TO YOU.

For SuperDrive 75 Series

Appx. 1/4”

Call 1-800-706-7337 or your sales rep. for replacement parts.

PARTS LIST - 75 SERIES TOOL 

QTY

725414 

MODULE (GREEN DOT) 

1

725415 

SPRING (GREEN) 1.7mm 

1

725413  

NOSEPIECE FLAT HEAD SCREW

 

M4x10mm 

1

725470 

NOSEPIECE SUBFLOOR AND 

 

METAL-TO-METAL 

1

725471 

NOSEPIECE DECK/DRYWALL 

1

725425 

END PLATE FOR 75 

1

725424 

WING SCREW FOR END PLATE 

1

725423 

BODY HEX SOCKET CAP SCREW

 

M4x8 

1

725422 

BODY HEX SOCKET CAP SCREW 

 

M4x10 

2

725416 

RETAINER SCREW - M3x6 

2

725416 

RETAINER FOR MODULE 3mm 

2

725427 

BRACKET FOR FEEDTRACK 

2

725428 

FEED TRACK HEX SOCKET SCREW

 

1/4”-20 x 7.4mm  

5

725426 

FEED TRACK 

1

725432 

TUBE FOR END PLATE 

1

 

 

 

DEPTH ADJUSTMENT PARTS 

QTY

725472  

DEPTH CONTROL RETAINER 

1

725474 

DEPTH CONTROL SPRING 

1

725473 

DEPTH CONTROL ADJUSTMENT

 

WHEEL 

1

725475 

SNAP E RING E2 

1

EXTENSION PARTS 

QTY

725476 

EXTENSION 19” 

1

729430 

BIT EXTENSION 

1

729431 

HANDLE ASSEMBLY 

1

725413

725470

725471

     

725414 (GREEN DOT)

725415 (GREEN)

725475

725473

725472

725416

725474

725424

725422

725425

725432

725428

725427

725423

725476

725430

725431

725426

725416

All manuals and user guides at all-guides.com

all-guides.com

Reviews: