Hitachi BZ-1 Manual Download | Manualshive

Page: 1 / 283

background image

1

Projector

CP-AW2519N

User's Manual (detailed)
Operating Guide

Thank you for purchasing this projector.

►Before using this product, please read all manuals for this

product. Be sure to read “

Safety Guide

” ﬁrst. After reading them, store them in a

safe place for future reference.

WARNING

• The information in this manual is subject to change without notice.

• The illustrations in this manual are for illustrative purposes. They may differ
slightly from your projector.
• The manufacturer assumes no responsibility for any errors that may appear in
this manual.
• The reproduction, transfer or copy of all or any part of this document is not
permitted without express written consent.

NOTE

Trademark acknowledgment

Various symbols are used in this manual. The meanings of these symbols are
described below.

About this manual

WARNING

CAUTION

This symbol indicates information that, if ignored, could possibly
result in personal injury or even death due to incorrect handling.

This symbol indicates information that, if ignored, could possibly
result in personal injury or physical damage due to incorrect
handling.

Please refer to the pages written following this symbol.

• Mac

®

is a registered trademark of Apple Inc.

• Windows

®

, DirectX

®

, DirectDraw

®

and Direct3D

®

are registered trademarks of Microsoft

Corporation in the U.S. and/or other countries.

• VESA and DDC are trademarks of the Video Electronics Standard Association.
• HDMI, the HDMI logo, and High-Deﬁnition Multimedia Interface are trademarks or registered

trademarks of HDMI Licensing LLC in the United States and other countries.

• Trademark PJLink is a trademark applied for trademark rights in

Japan, the United States of America and other countries and areas.

• Blu-ray Disc

TM

and Blu-ray

TM

are trademarks of Blu-ray Disc Association.

• StarBoard

®

is a registered trademark of Hitachi Solutions, Ltd. in Japan and other countries.

All other trademarks are the properties of their respective owners.

NOTICE

This entry notices of fear of causing trouble.

(Type nos. CP-AW2519N, CP-AW2519NM)

1
2
3
...
»

Summary of Contents for BZ-1




























































































































































































































































































Reviews:

No comments

Related manuals for BZ-1

Brand: Acer Pages: 3

Brand: Acer Pages: 2

CREE LIGHTING DOT Series

Brand: IDEAL INDUSTRIES Pages: 2

Brand: BenQ Pages: 1

Brand: BenQ Pages: 57

Brand: ACCO Brands Pages: 31

Brand: Optoma Pages: 2

Brand: Eiki Pages: 56

Evo Quattro Led

Brand: BoomToneDJ Pages: 18

Brand: Panasonic Pages: 4

Brand: Panasonic Pages: 8

Brand: Panasonic Pages: 6

Brand: Panasonic Pages: 13

Brand: Panasonic Pages: 6

Brand: Panasonic Pages: 6

Brand: Panasonic Pages: 13

Brand: Panasonic Pages: 6

Brand: Panasonic Pages: 6

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands