background image

 

1

No. 

 

HITACHI 

SERVICE MANUAL 

 

42HDF39 

 

 

 

 

Be sure to read this manual before servicing. To ensure safety from fire, electric shock, injury, harmful 
radiation and materials, various measures are provided in this Plasma Monitor.   
Be sure to read cautionary items described in the manual before servicing.   
These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric 
shock, do not perform any servicing other than that described in the operating instructions unless you are 
qualified to do so. 

 

1.  Since the Panel Module and the front Filter are made of glass, handling the broken Module and Filter 

carefully and with caution in order not to receive injury. 

2.  Replacement work should be started after the Panel Module and the AC/DC Power supply have 

become sufficiently cool. 

3.  Special care should be taken when working near the display area in order not to damage its surface.
4. The Panel Module should not be touched with bare hands in order to protect its surface from 

blemishes and damage. 

5.  It is recommended that you use clean soft gloves during the replacement work in order to protect not 

only the display area of the Panel Module but also yourself. 

 

 
 

1. Features -------------------------------------------3 

2. Specifications ------------------------------------4 

3. Component Names -----------------------------5 

4. Service points ------------------------------------7 

5. Adjustment ----------------------------------------8 

6. Troubleshooting --------------------------------13 

7. Block diagram ---------------------------------- 27

 

8. Connection diagram ---------------------------- 29 

9. Wiring diagram ----------------------------------- 30

10. Basic block diagram --------------------------- 31

11. Printed wiring board diagram ----------------

 

32

12. Disassembly diagram ------------------------- 39

13. Replacement parts list ------------------------ 41

 

 

 

SPECIFICATIONS AND PARTS ARE SUBJECT TO CHANGE FOR IMPROVEMENT. 

Plasma Monitor 

 

Caution 

Contents

Service Warning

Summary of Contents for 42HDF39














































Reviews: