High Valley 2500 Owner'S Manual Download

Page: 1 / 28

MODEL

2500

High Valley Stoves

Stoll

185 Highway 201

│

Abbeville, SC 29620

2500

2500 F

Safety No ce:

If this wood heater is not properly installed, a house

re may result.

For your safety, please carefully read and follow the installa on direc ons. Contact the local Building Inspector,
Fire O

ﬃ

cial, or other Authority Having Jurisdic on (AHJ) about code requirements, restric ons, and installa on

inspec on in your area. The AHJ can advise you if you are required to obtain a permit before installa on.

Failure to follow these instruc

ons can result in property damage, bodily injury, or even death.

Owner’s Manual

Safety, Installa on, Opera on, & Maintenance Guidelines

INSTALLER:

Leave this manual with the individual (s) responsible for opera ng this wood heater.

OPERATOR:

The Owner’s Manual contains important safety, opera ng, and maintenance informa on.

Please read and understand the en re Owner’s Manual before installing or opera ng this wood heater.
If you have ques ons please contact your High Valley Dealer for assistance.

DO NOT DISPOSE OF THIS MANUAL

SAVE THIS OWNER’S MANUAL FOR FUTURE REFERENCE

Summary of Contents for 2500





























Search results

Summary of Contents for 2500

Reviews:

Related manuals for 2500

Brands by name

Popular brands

High Valley 2500, Owner'S Manual

Search results

Summary of Contents for 2500

Reviews:

Related manuals for 2500

Brands by name

Popular brands