High End Systems Shapeshifter C1 User Manual Download | Manualshive

Page: 1 / 62

background image

S

HAPESHIFTER

User Manual

© Barco Lighting Systems, 2014, All Rights Reserved

Information and specifications in this document are subject to change without notice. Barco Lighting Systems
assumes no responsibility or liability for any errors or inaccuracies that may appear in this manual.

Trademarks used in this text:

High End Systems, Wholehog, and Lithopatterns are registered trademarks: and intellaspot, Internal Effects, the
High End Systems globe logo, and the Hog logo are trademarks of Barco Lighting Systems, High End Systems,
Inc. is a registered trademark. Belden is a registered trademark of Belden, Inc.

Other trademarks and trade names may be used in this document to refer to either the entities claiming the
marks and names or their products. High End Systems disclaims any proprietary interest in trademarks and
trade names owned by others.

SHAPESHIFTER User Manual

Version 1.2

June, 2014

1
2
3
...
»

Summary of Contents for Shapeshifter C1































































Reviews:

No comments

Related manuals for Shapeshifter C1

Brand: Hagie Pages: 61

Brand: JackJaw Pages: 2

Brand: GE Pages: 2

Druck DPI 620 Genii

Brand: GE Pages: 154

Arize Element Top Light

Brand: GE Pages: 2

Brand: Datex-Ohmeda Pages: 104

Druck DPI 620 Genii

Brand: Baker Hughes Pages: 166

Druck DPI 620 Genii

Brand: Baker Hughes Pages: 340

Brand: Palazzetti Pages: 112

Brand: Keiser Pages: 82

Brand: Keiser Pages: 4

Brand: P.Lindberg Pages: 76

Brand: T&D Pages: 28

Brand: Valko Pages: 10

Brand: Makita Pages: 208

Fresh DFG58D1BSS

Brand: Danby Pages: 11

Brand: Reflex Marine Pages: 36

Thermo Therapy TT-202

Brand: Whitehall Pages: 12

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands