background image

USER MANUAL

1

Caution

Please consult the professionals before installation or repairing. The company takes no liabilities for any damage or 

injuries that occur during the installation of the pipes, floor, wall and tub.

Thank you for shopping with Hernest, please read this user manual thoroughly for your full under

-

standing, installing, and application of the product. Please have this user manual well-reserved 

for future reference.

Before Installation

      

Check the package and ensure that all parts are included. If any part is missing or damaged, please contact us.

       Do not disassemble the main body, as it has been installed & commissioned correctly & precisely before leaving   

       the factory. 
       Shut off the main water supply before the installation.
       Do flush the water supply lines to remove any dirt and debris before installation (IMPORTANT). 
       Make sure to connect the hot/cold inlet pipe correctly. If standing in front, usually the hot water pipe connects to 
       the left and the cold water pipe to the right.
       Check for leaks and make sure every joint is safely sealed after the installation, 
       Turn on the water supply and flush the water pipes for 3 minutes to make sure it works well before putting it 

       into use.

SKU:H200166

Rainfall Thermostatic Shower System

Summary of Contents for H200166






Reviews: