manualshive.com logo in svg

HENNESSY INDUSTRIES coats 9028E, Installation Instructions Manual

The HENNESSY INDUSTRIES coats 9028E features a durable construction and advanced technological capabilities for optimal performance. Ensure proper installation with the included Installation Instructions Manual, available for free download from manualshive.com. This manual provides detailed guidance on setting up and using the product effectively.

Share
Download
background image

9028E

Rim Clamp

®

Tire Changer

For servicing single piece
automotive and most light
truck tire/wheel assemblies

 1601 J. P. Hennessy Drive, La Vergne, TN  USA  37086   615/641-7533   800/688-6359    www.coatsgarage.com 

Manual Part No.:    85611581 00

HENNESSY INDUSTRIES LLC  Manufacturer of COATS®, AMMCO® and BADA® Automotive Service Equipment and Tools.                                        Revision:   08/19

 Installation Instructions

Operating Instructions

Safety Instructions

Maintenance Instructions

 READ these instructions before placing unit in 
service KEEP these and other materials delivered 
with the unit in a binder near the machine for ease 
of reference by supervisors and operators.

See

Page 4

Operating 

Instructions

Summary of Contents for coats 9028E





























Reviews:

No comments

Related manuals for coats 9028E

Mondolfo Ferro AS 924 Operator'S Manual preview
AS 924
Brand: Mondolfo Ferro Pages: 332
Fasep V585.2.U User Manual preview
V585.2.U
Brand: Fasep Pages: 24

Brands by name

Popular brands

Load more brands