TraveLoo™ Toilet
Using the TraveLoo™ toilet
Prepare first
1.
With seat lid closed, pull flush handle open then push to close in order to relieve any
air pressure created in the holding tank due to changes in altitude or temperature.
2.
Remove water cap, fill supply tank with fresh water, replace cap.
3.
Pull flush handle all the way open.
4.
Pour an appropriate portable toilet deodorant directly into holding tank, then push
flush handle closed.
To use
1.
With seat lid closed, pull flush handle open, then push to close in order to relieve
any air pressure created in the holding tank due to changes in altitude or
temperature.
2.
If flushing solids is anticipated, press bellows pump to add water to bowl.
3.
Use toilet.
4.
Pull flush handle to release waste into holding tank.
5.
Press bellows pump as needed to rinse bowl.
6.
Push flush handle to close valve.
Empty holding tank
1.
Make sure flush handle is pushed all the way in.
2.
Disengaging side latches and separate holding tank from upper unit.
3.
Transport holding tank to a permanent toilet.
4.
Remove cap and empty into permanent toilet.
5.
Rinse tank, replace cap and reassemble unit for use.
Cleaning and Maintenance
Cleaning-
Use a NON-ABRASIVE bathroom and toilet bowl cleaner and follow instructions on the
label.
