INSTRUCTIONS:
PROTECTIVE SHIELD
INSTRUKTIONEN:
GESICHTSSCHUTZSCHILD
NÁVOD NA POUŽITIE:
OCHRANNÝ ŠTÍT
INSTRUKCJA
UŻYTKOWANIA:
MASKA OCHRONNA
EN - INSTRUCTIONS FOR USE
• Remove the product from the wrappage,
-grasp the mesh by one hand and the fore-
head holder by second hand. On both sides
of the bracket are adjusting latching pins to
attaching the mesh to align with the bottom
edge of the peak.
• Put on one side of the latching pins on the
net and secure it by turning 90 degrees. The
same operation will be made on the other
side. Before you start work you need to set a
protective shield on the shape of your head.
This is done by a nut at the rear part. Turn by
the nut to the left or the right for magnifying
or diminishing of the head part. Upper shield
buckle set to sit firmly on the head and ensu-
re that it doesnt hinder during the work and
in also in view.
• The product is designed to protect the face
against flying objects. Not protect against
splashed fluid. Product has been tested in ac-
cordance with EN 1731:2006 and meets the
requirements of the PPE Directive 89/686/EEC.
• Use the shield to work with trimmers, brush
or gasoline saw. For other purpose, this pro-
duct wasnt approved.
• Basic information on the protection of the pro-
duct and its function: Store the product in a
dry place and away from substances that may
affect the functions. Do not expose the shi-
eld to excessive heat, it may cause defomati-
on. Store the product in its original bag, by the
mesh on top and dont cover it by the other ob-
jects – it may cause damage or complete de-
struction of the product. Generally, we can not
determine the obsolescence of the product.
However, the mesh should be replaced if are
