background image

  
Assembly  instruction  JUNO    

 

 


 

 

 

 

The  manufacturer cannot  be held responsible if installation  is not carried out  according to these instructions. Installation must  
be  performed by  a specialized company in compliance with the regulations in force . Great care must be taken with tools and 
sealants  etc. when installing so as not  to damage the high quality finish.  

The radiator should be installed at  a minimum of 120 mm above the floor, so  that the  air valve is  at  the  top.  

-------------------------------------------------------------------------------------------------------------------------------------------------------------------------- 

Remove  all  packing from radiator  

1.

 

Screw the four threaded studs C into the threaded bushes D of the radiator. 

2.

 

Slide the four wall supports B onto the four threaded studs C  

3.

 

Measure exactly the centre to centre distances between these wall supports 
B, left to right and lower to upper measurement. 

4.

 

Using these measurements , drill four holes in the wall and fix together  with 
the  wall supports B using  the enclosed screws and wall plugs. 

5.

 

Hang and  adjust the radiator using the small grub screws E to lock the stud C 
in the wall supports B. Ensure that  the radiator is firmly and safety fixed.   

 
 
Heating element PMH-HT2-200-RK  - included------------------------------------------------------------------------------------------------------------- 
 
Introduction 

 
Manufacturer: HeatQ TECHNOLOGY / PL / 

 

Product information 

Type: 

HEC 1.0 

Type:

 

HEC 1.0 

Power supply:

 

230VAC, 50Hz 

Isolation class:

 

Power:

 

200W 

Moulding protection class:

 

IP54 

Electric connection type:

 

(the user must not replace the power cable – this cable can 

only be replaced by the 

 

Thread connection:

 

1/2" 

 
Purpose 

 
The properly selected electric heating element is used to heat rooms or dry clothes/towels by means of radiators filled up with a 
relevant heating agent. 

 
CAUTION! The heating agent (liquid heating agent in the radiator) cannot cause any corrosion or include any ethylene glycol, 
except for the agent that can be applied in central heating systems. 

 

 
 
 

JUNO-EN 

Reviews: