HCL HCM9LWAT11, Servise Manual

Page: 1 / 58

19"W LCD Color Monitor HCL HCM9LWAT11
1
Service
Service
Service
Horizontal Frequency
30-80 kHz
TABLE OF CONTENTS
Description Page Description Page
SAFETY NOTICE
ANY PERSON ATTEMPTING TO SERVICE THIS CHASSIS MUST FAMILIARIZE HIMSELF WITH THE CHASSIS
AND BE AWARE OF THE NECESSARY SAFETY PRECAUTIONS TO BE USED WHEN SERVICING
ELECTRONIC EQUIPMENT CONTAINING HIGH VOLTAGES.
Table Of Contents…………………………………………...1
Revision List………………………………………………....2
Important Safety Notice.…….........................……...... 3
1. Monitor Specification..............................…………........4
2. LCD Monitor Description…………………………….......5
3. Operation Instructions....................................…...........6
3.1. General Instructions...........................…....................6
3.2. Control Buttons..………………………….…...............6
3.3 Adjusting the Picture.................................…..............7
4. Input/Output Specification............……………...............9
4.1. Input Signal Connector............…………....................9
4.2. Factory Preset Display Modes......….........................9
4.3. Panel Specification.....………………........................10
5. Block Diagram….........................................................13
5.1 Software Flow Chart………………………….……….13
5.2.Electrical Block Diagram…………………….......15
6. Schematic……………..............................................17
6.1 Main Board....……….............................................17
6.2 Power Board………………………………………....22
6.3 Key Board…………………...….……………………24
6.4 Audio Board…………….……………………………25
7. PCB Layout..………….............................................26
7.1. Main Board………................................................26
7.2. Power Board….....................................................28
7.3. Key Board….........................................................30
7.4. Audio Board…......................................................31
8. Maintainability………...............................................32
8.1.Equipments and Tools Requirement......................32
8.2.Trouble Shooting………........................................32
9. White-Balance, Luminance adjustment………..…...38
10. Monitor Exploded View…………………….…........40
11. BOM List…............................................................41
12. Different Parts List…………………………….…….57
CAUTION: USE A SEPARATE ISOLATION TRANSFOMER FOR THIS UNIT WHEN SERVICING