background image

Modèle / Model:

PNT131

PNT131

68125026

Operator’

s Manual (p.13)

Manuel de l'utilisateur (p.2)

PISTOLET Ã CLAFEUTRER

PNEUMATIQUE

PISTOLET À CALFEUTRER

PNEUMATIQUE

AIR-POWERED CAULKING GUN

Manuel de l'utilisateur (p.2)

CONSERVEZ CE GUIDE

Vous aurez besoin de ce guide pour les règles de sécurité, les procédures d'utilisation et la garantie. 

Conservez-le avec votre facture d'origine dans un endroit sûr et au sec pour référence future.

SAVE THIS MANUAL

You will need this manual for safety instructions, operating procedures, and warranty.

Put it and the original sales invoice in a safe, dry place for future reference.

QUESTIONS? 1-866-206-0888

Notre personnel du service à la clientèle est disponible pour vous aider. 
Pour obtenir de l'aide pour le montage de votre produit, pour signaler 

des pièces endommagées ou manquantes, ou pour toute autre 

information, veuillez composer notre numéro sans frais: 1-866-206-0888.
Enregistrez votre produit

Nous vous invitons à enregistrer votre produit en ligne afin de faciliter les 

communications; pour ce faire, veuillez visiter le 

www.outilshaussmann.com

Our Customer service staff is available to help you.
For help with product assembly, to report damaged or missing parts, or 

for any other information, please call our toll-free number: 

1-866-206-0888.
Register your product

We invite you to register your product online to make future 

communications easier. To do so, simply visit our website 

www.haussmanntools.com.

Summary of Contents for 68125026




















Reviews: