GLO-RAY
®
INFRARED FOODWARMER
APPLICATION INFORMATION
Hatco Glo-Ray
®
Infrared Foodwarmers are available in a variety of sizes and combinations to fit holding areas
of any length or depth. Some of the installation possibilities are described on this sheet. For more application
information contact your local Representative or the Hatco Corporation
.
AVAILABLE SIZES
WIDTH:
Aluminum Housing —
18"-12' (457-3,658 mm)
.
Available in 6" (152 mm) increments –
single extrusion.
Stainless Steel Housing
— 24", 36", 48", 60", 72", and 96" (610, 914, 1219, 1524, 1829,
and 2438 mm) only.
DEPTH:
Aluminum —
6" or 9" (152 or 229 mm) or combinations using 3" or 6" (76 or 152 mm)
spacers.
Stainless Steel —
6" (15 cm) only.
Incandescent lights are available for aluminum models only and can be ordered on either side of unit. Center
lights recommended for dual warmer mounting. The 60-watt incandescent shatter-resistant bulbs provide
illumination only and feature a special coating that guards against injury and food contamination in the event
of breakage.
MIN. 18" (457 mm)
(152 mm)
MAX. 144" (3,658 mm)
Summary of Contents for Glo-Ray GRA-108
Page 7: ...NOTES 7 Form No GRAB 0804...
