WHAT’S IN THE BOX
•
DriveRack 260 Processor
•
Power Cable
•
Null Modem Cable
•
Rack Mount Screw Kit
Quick Start Guide
PRODUCT REGISTRATION
Register your product at http://dbxpro.com/en-US/
support/warranty_registration or scan the code to the
right with a QR scanner app on your mobile device.
DriveRack 260 Quick Start Guide
PN: 5059584-A
801.566.8800
© 2015 Harman. dbx Professional Products is a registered trademark of Harman. All rights reserved.
1
Getting Started
Before making any audio connections, perform the following:
•
Ensure power to your mixer, 260, and amplifier(s) are turned off.
•
Turn the attenuators on all power amplifiers or powered speakers all the way down.
•
Make the audio connections per your application (see the system diagrams inside this
quick start guide for reference).
•
Power up
the mixer, then the 260, then your amplifiers or powered speakers.
2
Run The Setup Wizard
The Setup Wizard will walk you through the configuration process. To run the Setup Wizard,
follow these steps:
A.
Press and hold the
WIZARD
button for
2 seconds.
B.
Select the “System Setup” Wizard option
by pressing the
SELECT
wheel.
C.
Follow the on-screen instructions. Use
the
NEXT PG
and
PREV PG
buttons
to navigate the Wizard and the
SELECT
wheel to make selections. Select the
“Custom” option for amplifier and/or
speaker models not listed in the System
Setup Wizard.
TIP:
The “GEQ” option must be selected to use the Auto EQ Wizard and the “AFS”
option must be selected as one of the inserts to use the AFS Wizard.
NOTE:
For information on manually configuring the 260 using Configuration mode,
see the “Manual Configuration” section inside this Quick Start Guide.
DOWNLOAD THE OWNER’S MANUAL
Get the owner’s manual at http://dbxpro.com/en-US/
products/driverack-260#documentation or scan the code
to the right with a QR scanner app on your mobile device.
