background image

SIT/STAND  

ROLLING WALKER

66838

INSTRucTIONS AND pREcAuTIONS 

 

 

 

 

 

 

 

 

 

 

 

 

 

Distributed exclusively by Harbor Freight Tools

®

3491 Mission Oaks Blvd., Camarillo, CA 93011 

Visit our website at: http://www.harborfreight.com

 

SAVE THESE INSTRucTIONS.  

READ ALL pREcAuTIONS 

AND INSTRucTIONS.

Copyright

©

 2009 by Harbor Freight Tools

®

.  All 

rights reserved.  No portion of this document or any 

artwork contained herein may be reproduced in any 

shape or form without the express written consent of 

Harbor Freight Tools.  Diagrams within this document 

may not be drawn proportionally.  Due to continuing 

improvements, actual product may differ slightly from the 

product described herein.  Tools required for assembly 

and service may not be included.

For technical questions or replacement parts, please 

call 1-800-444-3353

SpEcIFIcATIONS

Weight Capacity

225 lb.

Handle Height Adjustment 6 Positions

uNpAcKING

When unpacking, make sure item is intact 

and undamaged.  If parts are missing or broken, 

call Harbor Freight Tools at 1-800-444-3353.

ImpORTANT SAFETY 

INFORmATION

Assemble according to these instructions.  

1. 

Improper assembly can create hazards.

WARNING! 

2. 

This product should only be used 

by a person who has the physical capability 

to safely walk and sit on this device.
Do not exceed 225 lb. weight capacity.  

3. 

Be 

aware of dynamic loading!

  Sudden load 

movement may briefly create excess load 

causing product failure

use as intended only; Walker is not a 

4. 

wheel chair. 

Do not use to carry people. 

Wear ANSI-approved safety goggles and 

5. 

heavy-duty work gloves during assembly.
Make sure Walker is fully opened, Seat is 

6. 

down and folding bar beneath Seat is locked 

before use.
Make sure Handles are of equal height 

7. 

before use.  If one is lower than the other, 

adjust accordingly.  Apply gentle pressure to 

Handles to test Walker stability before use.
Test Brakes before use. If Wheels turn while 

8. 

Brakes are locked, have an authorized tech-

nician adjust Brakes. DO NOT use Walker if 

Brakes do not work properly.
Lock Brakes before sitting on Seat. Do not sit 

9. 

on Seat unless you on even, level ground.
Inspect before every use; do not use if parts 

10. 

are loose or damaged. Check tires regularly 

and replace when worn.
This product is not a toy.  Do not allow chil-

11. 

dren to play with or near this item.
Maintain product labels and nameplates.  

12. 

These carry important safety information.  

Summary of Contents for 66838

Page 1: ... 1 Improper assembly can create hazards WARNING 2 This product should only be used by a person who has the physical capability to safely walk and sit on this device Do not exceed 225 lb weight capacity 3 Be aware of dynamic loading Sudden load movement may briefly create excess load causing product failure Use as intended only Walker is not a 4 wheel chair Do not use to carry people Wear ANSI appr...

Page 2: ... into place by inserting the Retainer Pins 14 See Figure 2 below Use the Fasteners 26 to clasp the Basket 4 25 or PVC Bag 51 to the Cross Bolt 27 and the Back Frame 18 Operation To properly sit in the chair first make sure 1 the Walker is on a level surface Then check the brakes and grab both 2 Handles 4 Carefully back into the Walker Do NOT fall 3 back into the Walker To slow down or temporarily ...

Page 3: ...r use a soft damp cloth 1 Remove Basket or Bag and fold Walker To 2 fold pull on tie cord wrapped around Support Axle 42 Store folded Walker in dry secure area 3 Record Serial Number Here Note If product has no serial number record month and year of purchase instead Note Some parts are listed and shown for illustra tion purposes only and are not available individually as replacement parts PLEASE R...

Page 4: ...18 Back frame 1 19 Pipe stopper 2 20 M6 Locknut 6 21 Screw 2 22 Washer 14 23 Rivet 2 24 Rope 1 25 Basket 1 26 Fastener 2 27 Round cross bolt 4 Part Description Qty 28 Brake loop pothook 2 29 Turning axles 2 30 Front fork cover 2 31 Front fork 2 32 Bearing 4 33 Locknut 2 34 Knot 4 35 Round turning axles 2 36 Bearing 8 37 Locknut 4 38 Wheel 4 39 Screw 4 40 Washer 4 41 Support Hinges 2 42 Support axl...

Reviews: