Hamilton HA-1000 Installation Instructions Manual Download

Page: 1 / 6

Model

HA-1000/HA45

Overhead Teller Upgrade Kit

B6672

Installation Instructions

Parts List

Step #

Description

Quantity

10-32 x 1/4" Thick Spacer Nuts

Upper Door Ring (Aluminum)

Door Bearing (Black Plastic)

Detent Mounting Block

Spring Plunger Detent (Installed in Mounting Block)

10-32 x 3/8 Set Screw (Installed in Mounting Block)

3/32" Allen Wrench

Grease, Mini tube Lithium

Foam Strip Seal (1/4" x 9-3/4") P/N B6620

10-32 x 1/4" HHMS

Note:

Please retain all parts removed from unit and return using supplied UPS label.

Summary of Contents for HA-1000

Page 1: ...inum 1 8 Door Bearing Black Plastic 2 15 Detent Mounting Block 1 15 Spring Plunger Detent Installed in Mounting Block 1 15 10 32 x 3 8 Set Screw Installed in Mounting Block 1 15 3 32 Allen Wrench 1 15 Grease Mini tube Lithium 1 17 Foam Strip Seal 1 4 x 9 3 4 P N B6620 1 20 10 32 x 1 4 HHMS 2 Note Please retain all parts removed from unit and return using supplied UPS label ...

Page 2: ... Chamber Cover Note Cover is sealed with silicone from factory Only needs re sealed if used in Point to Point 22 35 20 Step 3 Remove 3 Coupler Nuts holding lower frame Step 4 Remove Door Assembly including ALL rings Remove Lower Frame and spacer nuts Note New Spacer Nuts Supplied in Kit ...

Page 3: ...be cleaned so that top Door Bearing existing screws rest flat under top plate K 17 K K 10 2 3 3 2 Step 7 Replace Upper Door Ring with part in kit Step 8 Replace upper and lower Door Bearings with New ring has cylinder retained by screw for detent parts in kit Note Make sure only one Bearing Race is used on top and bottom of door ...

Page 4: ...ts stacked as shown in step 7 11 34 Step 11 Check rotation and vertical play of door Step 12 Re install Exhaust Chamber Cover Shim washers may need to be added to spacers Note Cover is sealed with silicone from factory installed in step 6 to free door rotation Only needs re sealed if used in Point to Point ...