Hamilton H-LED-STAT, Installation Note

Page: 1 / 6

i-H-LED-STAT-1002 Rev A LEDstat 100W Dimmer Module
Product Photo / Diagram 1
Technical Features:

Designed to control mains dimmable LED lamps or
luminaries.

Dims up to 100W of LED lamps in trailing edge mode:
 20 x 5W = 100W.
 16 x 6W = 96W.
 14 x 7W = 98W.
In Leading Edge mode the maximum capacity decreases
by 25%.

MAX 75W Leading Edge.

MAX 100W Trailing Edge.

Minimum load down to 5W of load, such as LED, CFL
(compact fluorescent light bulbs) & MV (Mains Voltage)
halogen bulbs.

Soft start feature helps extend lamp life.

Manually select dimmer mode (Leading or Trailing edge).

Set minimum light level via the potentiometer.

Can be used as part of a multi-way dimming operation
allowing you to switch and dim the lights from multiple
points via Hamilton retractive switches or toggles.

Available in 1 to 4 gang plate options on all Hamilton plate
ranges and finishes.

Electronic ON/OFF Auto Detect - Intelligent Dimmer
Module.

Built in thermal overload protection.

Designed to fit in a 35mm BS4662:2006 flush wall box.
H-LED-STAT
Electronic On/OFF Auto Detect Intelligent Dimmer Module.
Primary Range
Dimming
Terminals Switch input, Live, Load
Input Rated Voltage
230-240V AC ~ 50Hz
Capacity – Minimum Load 5W
Capacity – Maximum
Load
100W Trailing Edge
75W Leading Edge
Input Voltage Tolerance +5% - 10%
Nominal Frequency 50Hz
Nominal Power
Consumption
<0.5W@ Standby Mode
No. Of Operation Modes
2 Operation Modes
Trailing Edge = 100W
Leading Edge = 75W
Ambient Temperature
Range
0˚C to +70˚C
Operating Position
Wall Mounted
Surge Voltage +/- 1KV AC
Contact Gap Minimum
(ɛ) Electronics Control
Dimensions (mm) 24.5 (W), 62 (L), 23 (H)
Standard & Approval
BS EN 60669 – 2 – 1
Please dispose of electronic equipment responsibly.