INS #
Brand Logo
reversed out of
black
INS #
DISCLAIMER OF LIABILITY: Eaton assumes no liability for damages or losses of any kind that may arise from the
improper, careless, or negligent installation, handling or use of this product.
IMPORTANT:
Read carefully before installing fixture. Retain for future reference.
ote:
N
Do not energize the LED Engine until the overspray protector has been removed. Do not touch the surface of the
LED as it may damage the light engine.
When using electrical equipment, basic safety precautions should always be followed, including the following:
1. This unit is for recessed mounting only.
2. Do not use this equipment for other than the intended use.
3. Install only in accordance with National Electrical Code and local regulatory agencies’ requirements.
Tools Required:
#2
X
4”
Phillips
screwdriver
Right angle ratchet and ¼” hex socket
Installation Instructions – HL36A and HL36SA Recessed Adjustable LED
Instructions d’installation – Modèles de luminaire encastré à DEL
ajustable HL36A et HL36SA
Instrucciones de instalación - HL36A y HL36SA LED ajustable empotrado
IB518178ML
WARNING
SAFETY INSTRUCTIONS
Risk of Fire, Electrical Shock, Cuts or other Casualty Hazards- Installation and maintenance of this
product must be performed by a qualified electrician. This product must be installed in accordance
with the applicable installation code by a person familiar with the construction and operation of
the product and hazards involved.
Risk of Fire and Electric Shock- Make certain power is OFF before starting installation or
attempting any maintenance. Disconnect power at fuse or circuit breaker.
Risk of Fire- Minimum 90°C supply conductors.
Risk of Burn- Disconnect power and allow fixture to cool before handling or servicing.
Risk of Personal Injury- Due to sharp edges, handle with care.
Failure to comply with these instructions may result in death, serious bodily injury and property
damage.
