VERTICAL CUTTER MIXER VCM-61 / VCM-62
UsER InsTRUCTIons
0319
All standard Hällde products are designed to run at 220-240V per phase, 50Hz.
All specifications are nominal only. All information contained in this instruction is subject to change without notice
due to constant research and development. AB Hällde Maskiner reserves the right to make changes to machines,
accessories and cutting tools.
All care has been taken to ensure correct information at time of printing. AB Hällde Maskiner
accepts no responsibility for printing errors.
Roband Australia Pty Ltd
1 Inman Road,
Cromer, nsW 2099
Australia
Tel: +61 2 9971 1788
Fax: +61 2 9971 1336
Email: [email protected]
www.roband.com.au
robandaustralia
Made in sweden. Exclusively distributed and serviced in Australa by Roband Australia Pty Ltd.
Summary of Contents for VCM-61
Page 5: ...HALLDE User Instructions Vertical Cutter Mixer VCM 41 and Vertical Cutter Blender VCB 61...
Page 6: ...HALLDE User Instructions Vertical Cutter Mixer VCM 41 and Vertical Cutter Blender VCB 61...
Page 7: ...HALLDE User Instructions Vertical Cutter Mixer VCM 42 and Vertical Cutter Blender VCB 62...
