Hako Scrubmaster B12
1.
Disconnect mains plug of the charger from outlet and fasten to holder
1
.
2.
Fill the clear water tank
2
from opening
3
.
( tank volume 16 l )
3.
Switch the machine on by the switch
4.
4.
Adjust the height of the handle with lever
5.
5.
Use pedal
7
to lower squeegee
6
.
6.
Start the suction motor
8
and water
9.
7.
Pull the starting lever to handle
10.
Brushmotor starts.
8.
Move on. Use switch
11
under the machine to adjust the water ( if
necessary )
NOTE! Make sure that pad / brush is installed!!!
OPERATION:
Qualified persons only are authorised to operate the machine!
The machine is not designed for coarse material! Floor area sweeping before!
Use only cleaning agents suitable for automatic machines ( low-foaming )!
Please pay attention to the informations in the instruction manua!
1
3
2
5
4
6
8
7
9
11
10
