background image

Maximum: D.B

10.The appliance must be installed on strong enough supporter.

9.Young children should be supervised ensure that they do not play with the appliance.

8. The appliance is not intended to use by young children or infirm persons without supervision.

7. The waste battery should be disposed properly.

6. After installation, the power plug should be easily reached.

5. The wiring method should be in line with the local wiring standard.

4. The distance between the indoor unit and the floor should be more than 2m.

3. If the fuse on PC board is broken please change it with the type of T. 3.15A/250V.

11.The wiring diagram is attached inside the machine.

or a similar qualified person. The type of connecting wire is H05RN-F or H07RN-F

2. If the supply cord is damaged, it must be replaced by the manufacturer or its service agent

Cautions

The machine is adaptive in following situation

I. Applicable ambient temperature range:

Cooling

Heating

Indoor

Outdoor

Outdoor

Indoor

Maximum: D.B / W.B

32

o

C/23

o

C

18

o

C/14

o

C

43

o

C/26

o

C

18

o

C

27

o

C

15

o

C

24

o

C/18

o

C

-7

o

C/-8

o

C

Minimum:  D.B / W.B

Minimum:  D.B
Maximum: D.B
Minimum:  D.B
Maximum: D.B / W.B
Minimum:  D.B / W.B

Summary of Contents for HSU-18RC03/R2



















Reviews: