background image

 Page 1

Luna

Thank you for purchasing a Gulf Coast Fans product.   It will provide 

years of cost efficient comfort.   With over a decade of experience in 

ensuring quality workmanship at an affordable price, we stand 

behind our product and we hope you will too. 

IMPORTANT  PRECAUTIONS

Read these instructions carefully before you start.

Turn off the power at the source before installation, servicing, or cleaning.

WARNING--TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT 
USE THIS FAN WITH ANY SOLID STATE SPEED CONTROL DEVICE. USE ONLY 
GULF COAST CONTROLS.

WARNING--TO REDUCE THE RISK OF PERSONAL INJURY, DO NOT BEND THE 
BLADE IRONS WHEN INSTALLING ON BLADES, BALANCING THE BLADES, OR 
CLEANING THE FAN.  DO NOT INSERT FOREIGN OBJECTS IN BETWEEN 
ROTATING FAN BLADES.

WARNING--TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR 
PERSONAL INJURY, MOUNT FAN TO AN OUTLET BOX MARKED 
"ACCEPTABLE FOR FAN SUPPORT" AND USE THE MOUNTING SCREWS 
PROVIDED WITH THE OUTLET BOX.

If you don't feel comfortable hanging and wiring this fan, we recommend that you 
hire a qualified electrician to install it.

All wiring and electrical connections must meet the National Electrical Code and any 
local codes that may apply.

After installation, fan blades must be at least seven (7) feet from the floor.

1

2

3

4

5

6

7

8

READ AND SAVE THESE INSTRUCTIONS

Gulf Coast Fans 2010 - Portions 

â

 1993

Summary of Contents for Luna

Page 1: ...HE RISK OF PERSONAL INJURY DO NOT BEND THE BLADE IRONS WHEN INSTALLING ON BLADES BALANCING THE BLADES OR CLEANING THE FAN DO NOT INSERT FOREIGN OBJECTS IN BETWEEN ROTATING FAN BLADES WARNING TO REDUCE THE RISK OF FIRE ELECTRIC SHOCK OR PERSONAL INJURY MOUNT FAN TO AN OUTLET BOX MARKED ACCEPTABLE FOR FAN SUPPORT AND USE THE MOUNTING SCREWS PROVIDED WITH THE OUTLET BOX If you don t feel comfortable ...

Page 2: ...the canopy hole is to protect the motor housing during installation It is cut away later 1 1 2 2 a b THREADED PIN SET SCREW Place the downrod ball combination through the canopy Feed the fans wires through the downrod and insert downrod into the top of the motor housing Align the holes in the downrod with those in the coupler Fig 3 3 4 5 Insert the threaded pin through the larger hole in the motor...

Page 3: ...halogen light or just the cover Using the 3 16 32x3 8 blade screws three of each per blade secure blade to motor Repeat this procedure with the rest of the blades You will have at least one screw left over this is a spare Be sure all of the screws are tight Right side of Fig 8 Both Glass Dome and Cover Dome have a mounting ring Align the dimpled tabs of the plate with the gaps in the fan s mountin...

Page 4: ... Check wirenut connections at fan and switch Double check wiring diagrams Fan makes noise Please allow 24 hrs to fully seat bearings Screw s is are loose somewhere Ball is not seated properly in hanging bracket Variable control solid state dimmer in the circuit Fan wobbles Bracket is loose at the ceiling Loose screw at top of fan Ball is not seated properly in hanging bracket We stand behind our p...

Reviews: