CA
UTI
ON
W
ARNI
NG
PRODUCT SPECIFICATIONS:
- When using product, basic precautions should always be followed.
- Read and follow these instructions and observe all warnings.
- Carefully read and understand the information given in this manual
before beginning installation. Failure to do so could lead to electric
shock, fire, or other injuries which could be hazardous or even fatal.
- Save these instructions and warnings.
W
ARNI
NG
-Warning: This tape light may present a shock or fire hazard if the
installation instructions are not followed carefully. Please only
install in locations that follow current electrical codes and adhere
to National Electric Code standards.
- Do not connect the tape light to power prior to installation.
- This GT-Lite tape light is connectible up to 28 feet.
- Please follow precise instructions on extending the tape light on
Page 2 and 3 under Installation Instructions.
- The power supply provided can hold a load of 22.4 watts (1.9A at 12V) or 1.4 watts per foot.
- Do not run this tape light off of any power supply other than the one provided in this packaging.
- Do not install this tape light on outlet connected to dimmer switch of any kind.
- Never place power supply or receiver in locations exposed to moisture.
- This item is rated for dry use only. NEVER submerge this product in water!
16ft LED TAPE LIGHT
800 LM
23W
RGBW
4ft 12V DC Adapter
Brightness (Lumen)
Power (Watts)
LED (Light)
Power Supply
Assembly & Installation: GT-LTP-3 | 16ft LED Color Tape Light
Complete LED Lighting Solutions
WARNING:
TO AVOID RISK OF ELECTRICAL SHOCK,
SHUT OFF POWER BEFORE
INSTALLING OR SERVICING THIS FIXTURE
PAGE 1
