1.
To reduce the risk of electric shock, this lamp has a
polarized plug (one blade is wider than the other ).
The
plug will fit in a polarized outlet only one way. If the plug
does not fit fully into the
outlet reverse the plug. If plug
still does not fit, contact a qualified electrician.
Never use an extension cord unless the plug can be fully
inserted. Do not alter the plug.
2
. Do not install non-factory wiring or any other electrical
components. Altering or modifying the lamp in any way will
3.
Avoid laying objects directly over the power supply cord
to avoid cutting or damaging the wire.
4
. Keep curtains, shades, wall hangings and all other
fabrics and objects away from the lamp shade, light switch
and the light bulb. Lamps are not designed to support
additional weight. Do not hang any objects from the lamp
or any lamp part.
5.
Place the lamp on a stable, level surface in an area
where the lamp will not be tipped over or bumped.
BULB REPLACEMENT
(
not included).
1.
Turn off and unplug the lamp and allow bulb to cool
before replacing bulb.
2.
Light bulb should never touch the lamp shade.
CLEANING AND MAINTENANCE
1.
To clean: use a soft, dry cloth only.
2.
Do not use chemical or abrasive cleaning solutions.
Use one 100-watt maximum type A 3-way bulb or one
25-watt maximum E26-base 3-way CFL bulb.
This lamp is approved for indoor use only.
DO NOT EXCEED RECOMMENDED BULB WATTAGE.
18231-001
Made In China
For Customer Assistance:
www.growthproductsllc.com
Read and Save:
render the product unsafe.
6.
ASSEMBLY INSTRUCTIONS
FLOOR LAMP
IMPORTANT SAFETY INSTRUCTIONS
1.
Carefully unpack and line up all parts. Protect assembly
surface to avoid scratching the lamp or assembly surface.
2.
Carefully pull out any excess power cord through Base
(A) during all assembly steps to prevent the cord from
becoming twisted and to position the tubes together.
3.
Thread Tube (B) into Base (A) by turning clockwise
to tighten.
4.
Thread Tube (C) into Tube (B) by turning clockwise
to tighten.
5.
Thread Tube (D) into Tube (C) by turning clockwise
to tighten.
6.
Thread preassembled Socket Assembly (E)
into Tube
(D) by turning clockwise to tighten.
7.
Install Light Bulb into Socket Assembly (E).
(Light Bulb not included).
8.
Pinch and insert Harp (F) into the harp fittings on
Socket Assembly (E) and remove Finial (H) from Harp (F).
9.
Place the shade (G) on harp (F) and secure with
finial (H).
10.
Insert plug into an electrical outlet.
11.
Use 3-way switch on Socket Assembly (E) to turn
lamp on and off.
A
B
C
D
E
F
G
H
