RM-MAG-IT/RS
Installation Guide
Version 1.0 August 2020
Magstripe IT/RS
Reader Module
General
The RM-MAG-IT/RS is an internal
swipe card reader for magnetic
stripe cards:
Standard Clock and Data output
Reads cards encoded to ISO
7811 in either direction
Switch selection for Track 1 or
Track 2 with software override
on IT series equipment
Easy to fit - no wiring required
Automatic configuration when
used in IT series equipment
This Reader Module is suitable for
both RS and IT series Terminals
including the following:
RS21
IT31
GT4
The Reader Module locates in the
Front Panel and connects
to the Terminal main board using
the ribbon cable provided.
Module Power Loading
8mA @12V Terminal Power IN
Track Select Switch
Track 1 < > Track 2
Diagnostic LED
Slow flash indicates
healthy module
Mounting Screw Position
Screws are provided
Mounting Screw Position
Screws are provided
Reader Module
Ribbon Connector
Connects to
terminal front panel
Reader Module Position
The Reader Module is positioned on the Front Panel as indicated.
RS21
IT31
GT4
1
1
1
1
2
2
2
2
3
3
3
3
3
3
3
Reader Connector
Module Position
Screw Fixings
