For questions or help with this product contact Tech Support at (570) 546-9663 or [email protected]
MODEL T32713
NEGATIVE PRESSURE GAUGE
KIT FOR G0860/G0861/G0862
DUST COLLECTORS
INSTRUCTIONS
COPYRIGHT © AUGUST, 2021 BY GRIZZLY INDUSTRIAL, INC.
NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
(FOR MODELS MFD. SINCE 08/21) #CS22017 PRINTED IN TAIWAN
Introduction
The Model T32713 Negative Pressure Gauge Kit
can be installed on the Model G0860, G0861, and
G0862 dust collectors to indicate when to clean or
replace the canister filter.
V1.08.21
To reduce your risk of
serious injury, read this
entire manual BEFORE
using machine.
Figure 1. Model T32713 Negative Pressure
Gauge Kit.
Box Contents (Figure 2)
Qty
A. Pressure Gauge Assembly ......................... 1
B. Clear Tube
1
⁄
2
" x 24" ................................... 1
C. Hose Clamps
1
⁄
2
" ........................................ 2
D. 90
º T-Fitting
1
⁄
2
" x 1
1
⁄
2
" x 1
1
⁄
2
" ...................... 1
E. Dust Hose 1
1
⁄
2
" x 4
3
⁄
4
" ................................. 1
F. Hose Clamps 1
1
⁄
2
" ...................................... 2
Inventory
A
B
C
D
E
F
NOTICE
If you cannot find an item on this list, care-
fully check around/inside the machine and
packaging materials. Often, these items get
lost in packaging materials while unpack-
ing or they are pre-installed at the factory.
Figure 2. Inventory.
Installation
Use the following steps to assemble the Model
T32713 and attach it to your Model G0860,
G0861, or G0862 dust collector.
Items Needed
Qty
Wrenches or Sockets 10mm ............................ 2
Phillips Head Screwdriver #2 ............................ 1
Wear safety glasses during
the entire setup process!
