TIER 1 ADVANCED POWER STRIP
Current Sensing Power Strip
LIMITED WARRANTY:
This product is warranted to be free from defects in workmanship and material for 2 years. If it fails to do so,
Greenlite™ will send you, at its election, a replacement product upon receipt of the returned product and proof
of purchase. This limited warranty does not cover product subject to accident, neglect, abuse, misuse or acts of
God. Replacement or refund is your sole remedy.
Customer Support:
info
@
greenliteusa.com
or
1-844-695-9090
from 9:00 AM to 5:00 PM EST.
INSTALLATION INSTRUCTIONS
1) CONTROL OUTLET (1)
Plug the main device (Computer, TV, etc.) into this outlet. When the main controlling device is set to off,
sleep, or standby mode, the Current Sensing Power Strip will automatically turn off any devices plugged into the
AUTOMATICALLY SWITCHED OUTLETS.
2) AUTOMATICALLY SWITCHED OUTLETS (3)
Plug the peripheral devices (Printer, DVD Player, etc.) into these outlets. These peripheral devices will be automatically
controlled by the main device plugged into the CONTROL OUTLET.
3) ALWAYS ON OUTLETS (2)
Plug the devices (Fax machine, cordless phone, cable or satellite receiver) that you do not want turned off into these
outlets.
4)
Plug the Advanced Power Strip power cord into a properly grounded wall outlet and then press the red RESET/OFF
switch to the RESET (on) position. The SURGE lights should be illuminated, indicating that the circuit is functioning
properly.
ADJUSTABLE THRESHOLD:
Although the preset for Greenlite’s Advanced Power Strip works with most popular electronics, you may need to adjust the
sensitivity level for your connected devices. (Use a screwdriver to adjust the sensitivity level)
If the peripheral device(s) plugged into the AUTOMATICALLY SWITCHED OUTLETS do not turn on:
- Make sure the device plugged into the CONTROL OUTLET is in the “on” position.
- Turn the ADJUSTABLE THRESHOLD dial clockwise to adjust the sensitivity level until the peripheral devices that are
plugged into the AUTOMATICALLY SWITCHED OUTLETS are powered on.
- Turn off the device plugged into the CONTROL OUTLET. If the AUTOMATICALLY SWITCHED OUTLETS also turn off,
then your Advanced Power Strip is working correctly. If not, please follow the steps below.
If the AUTOMATICALLY SWITCHED OUTLETS do not turn off:
a. Make sure the device plugged into the CONTROL OUTLET is in the “off” position.
b. Turn the ADJUSTABLE THRESHOLD dial counter-clockwise until the peripheral devices plugged into the
AUTOMATICALLY SWITCHED OUTLETS are turned off. Important note: do not force the ADJUSTABLE THRESHOLD
dial.
Model NO. T1O6M1S3TT/A01
www.greenliteusa.com
V2-07022020
