![background image](http://html.mh-extra.com/html/greenbrook/powerbreaker-j62-y/powerbreaker-j62-y_installation-and-operating-instructions_2261386001.webp)
Model Number: J62-Y
PowerBreaker J62-Y is a two pole in-line
portable RCD, designed for use in commercial
and industrial environments where rough
handling is expected. The water resistant
casing of the unit is rated at IP65 (IEC 61540).
This unit should be installed to current IET
wiring regulations if in doubt consult
a qualified electrician.
This product should be wired with 1.5mm2
3 core flexible cable (BS6500). Connect cable
to the input and output terminals, ensuring
that the following is observed.
• Live/Brown to Brown wire terminal
• Neutral/Blue to Blue wire terminal
• Earth Green/Yellow to Green/Yellow
Terminal
Ensure that there are no loose strands of wire.
To ensure the IP rating, terminals and cover
should be sealed with the supplied sealant.
• When fitting plugs, sockets or connectors
follow the accessory manufacturer’s
instructions ensuring that the live, neutral
and earth (if any) cores are connected
correctly and the outer covering of the
cable is firmly secured.
• The plug on the appliance should be
fused in accordance with the appliance
manufacturer’s instructions.
• To maintain the IP65 weather proof
rating of the device, plugs, sockets and
connectors of an equivalent rating must
be used
.
Please carry out the simple test procedure
prior to each use.
• Insert plug into power socket outlet.
• Press and release reset button -
the red indicator should appear in the
window.
• Press the test button - the red indicator
should disappear.
This means the RCD has tripped
successfully, cutting off the power from
the RCD.
• Now press and release the reset button
again, the unit is ready for use.
If the red indicator fails to work as described
above, do not use.
IMPORTANT FOR YOUR PROTECTION
• Electricity is dangerous and an RCD
must not be used as a substitute for
normal precautionary measures.
• Always unplug from mains supply before
any inspection or repair to equipment.
• Do not allow children to tamper with
electrical devices.
• Should your PowerBreaker repeatedly
trip with an appliance connected, or fail
to trip when tested, seek advice
immediately from a competent electrician
or return to place of purchase.
• This device will protect against live and
neutral faults to earth. It will not protect
against electric shock due to contact with
both conductors, short circuits between
live and neutral, or a fault in the wiring
supplying this device
WIRING
INSTRUCTIONS
Installation/Operating
Instructions for 16 Amp 110V
In-line Portable RCD
WARNING
IMPORTANT
J62-Y Ins July 19.qxp_J62-T 03/09/2019 14:16 Page 1