![background image](http://html1.mh-extra.com/html/green-go/ggo-wbp/ggo-wbp_quick-start-manual_2261307001.webp)
g
Green-GO Wireless Quick Start Guide
www.greengodigitial.com
Version 2.2
Thank you for choosing the Green-GO Wireless Intercom system.
The Green-GO Wireless Intercom system consists of the following hardware:
-
GGO-WBP: Wireless Belt-pack
-
GGO-WAA: Active Antenna (Sold Separately)
What’s in the box:
•
1 x Green-GO Wireless Unit
•
1 x Battery Pack
•
1 x USB Charge Cable
•
1 x USB Wall Outlet
1
RGB Display
4
Battery Compartment
2
Selection Button
5
USB Charge Port
3
Clickable Rotary Encoder
6
LED Indicator
7
Retaining Screw
8
Power On/Off Switch
9
4-Pin XLR Headset Socket
Setting up the Green-GO Wireless Belt-pack
o
The battery should be charged and ready to go, however due to the time the unit may have
spent in storage, we recommend that you charge the battery for approximately 4 hours via the
included USB cable and USB Power Adapter
o
We advise use of a wall outlet to avoid power surge occurring from use with a USB port.
o
Once the battery is charged, take the battery off charge.
o
Insert the battery into the Green-GO wireless belt-pack unit by sliding it into the main section.
When doing so, ensure that the pack is inserted so that the screw hole of the battery pack
matches the screw hole of the main Green-GO unit. Push the battery fully into the slot, and
secure with the retainer screw. The battery can be charged inside the Green-GO belt-pack,
and does not need to be removed.
o
Connect your microphone headset to the unit, ensuring that you are using a headset with a 4-
Pin XLR Female Connection.
1
2
3
4
5
6
7
8
9