PAGE 1 OF 2
“QUICK DRAW”
Overhead Gun Rack
(PATENT# D687.247)
MODELS: QD858 OGR ; QD860 OGR for Pro Fit Roll Cages
QD858 OGR Polaris Ranger 900,1000, Pro Fit, Can AM Defender Pro Fit
QD860 OGR Polaris General, 570 Mid Pro Fit Cage
PLEASE READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THE “QUICK
DRAW” OVERHEAD GUN RACK FOR POLARIS RANGER 900.
**NOTE**FAILURE TO READ INSTRUCTIONS AND WARNINGS COULD RESULT IN
INJURY OR DEATH.
INSTRUCTIONS FOR INSTALLATION AND USE:
CONTENTS
FIG. 1
PAGE 2 OF 2
CONTENTS:
1
– 858 MOUNTING BAR
1
– ALL THREAD ADJUSTMENT ROD
2
– GUN CLIP SETS
2
– 1/4" X 1 3/4" BOLTS
2
– 1/4" LOCKNUTS
4
– FLAT WASHERS
1
– 3/4" FLAT WASHERS
**NOTE**THE FLAT WASHER IS TO BE
INSTALLED BETWEEN THE JAM NUTS & THE
GUN RACK BODY
ATTACH GUN CLIPS TO MOUNTING BAR
USING 1/4" X 1 3/4" BOLTS, FLAT WASHERS
& LOCKNUTS.
**NOTE**
THERE ARE 3 SETS OF HOLES IN
858 MOUNTING BAR. CHOOSE HOLES THAT
BEST ACCOMMODATE GUNS.
SLIDE THREADED ADJUSTMENT ROD INTO OPEN END OF MOUNTING BAR. PLACE GUN
RACK BETWEEN LEFT & RIGHT ROLL BARS (
SEE FIG. 1-ABOVE
) & SLIDE ADJUSTMENT ROD
OUT UNTIL GUN RACK IS EXTENDED BETWEEN ROLL BARS. TIGHTEN NUTS ON
ADJUSTMENT ROD AGAINST MOUNTING BAR UNTIL 858 GUN RACK IS SECURELY HELD
BETWEEN ROLL BARS.
