Start Here
Unpack Your DV2140
• DVD+VCR
• Remote control
• 1.5V AAA batteries (2)
• RF (Radio Frequency) Antenna cable
• RCA cable for Audio/Video connections
• User’s guide
• Read Me First/Quick Reference Guide
• Warranty registration card
Insert Batteries
1
Remove battery cover.
2
Insert two 1.5V AAA batteries, paying
attention to the correct polarities (+/–).
3
Replace cover.
• CD-ROM, CD+G, and CD-i discs cannot be
played on this DVD player.
Q uestions?
O ur Award-W inning Customer
Service Professionals are
R eady to Help!
O r Check O ur
Website!
www.govideo.com
Call Us!
1-800-736-7679
E -M ail Us!
DO N O T R E TUR N THIS
PR O DUCT TO THE STO R E !
Thank
You!
For Fast, Friendly
Service
For a Prompt Reply
For the Latest FA Q s
STOP
DVD+VCR
Television
RCA Audio/Video
Cable
RF Antenna
Cable
:: Basic Connections
To get started, you will need to connect the DVD+VCR to your TV. The DVD+VCR
clock will be set automatically.
1 Connect Antenna to DVD+VCR
Connect an indoor/outdoor antenna or
wall outlet antenna cable to the ANT. IN jack on the rear panel.
2 Connect DVD+VCR to TV
Choose one of the following methods:
a. RF Connection
Using the supplied RF antenna cable, connect the RF OUT
jack on the back panel of the DVD+VCR to your TV’s Antenna Input.
b. Line Connection
Using the supplied RCA-type audio/video cable (red,
white, yellow), connect the DVD/VCR OUT jacks on the back panel of your
DVD+VCR to your TV's Audio/Video In jacks. If your TV is equipped with RCA
jacks, it is better to use the Line Connection method.
3 Plug In
Plug the DVD+VCR power cable into a standard 120V/60Hz wall
outlet.
4 Turn On Your DVD+VCR
Press the POWER button on the remote control
or front panel of the unit.
5 Turn On Your TV
Press the POWER button on your TV.
6 Set the TV to Channel 3 or Line
The factory default is channel 3. See
the User's Guide to change the RF Output to channel 4. If you are using the Line
Connection method, set your TV to its Line or Video input.
• You must use either the Standard RF or Line connection between your TV
and DVD+VCR, even if you plan to use the S-Video or Component Video
Output for improved DVD picture quality.
• The S-Video and Component Video Outputs are for DVD playback only!
• See the User's Guide for advanced connections.
Antenna/Cable TV
A/V IN
ANT IN
POWER
DV2140
AV2 IN
CH
PAUSE
PLAY
REW
STOP
FF
DVD/VCR
VIDEO
COPY
REC
DVD EJECT
VCR EJECT
L - AUDIO - R
