background image

HT SERIES USER MANUAL

Photovoltaic 

Grid-Tie Inverter

SOLAR INVERTER

Note: The above contact information is subject to change without notice. For details, refer to the

company's official website www.goodwe.com

SEMS Portal website

Offical Website

SolarGo APP

SEMS Portal App

GOODWE (Germany)

Fürstenrieder Str. 279a 81377 München, Germany
T: +49 897449 421 83570-170 (service)
[email protected]
[email protected]

GOODWE (Brazil)

Rua Abelardo 45, Recife/PE, 52050-310
T: +55 81 991239286
[email protected]
[email protected]

GOODWE (Netherlands)

Franciscusdreef 42C, 3565AC Utrecht, the Netherlands
T: +31 (0) 30 737 1140
[email protected]
[email protected]

GOODWE (UK)

6 Dunhams Court, Dunhams Lane, Letchworth
Garden City, SG6 1WB UK
T:+ 44 (0) 333 358 3184
[email protected]  /  [email protected]

GOODWE (India)

1202, G-Square Business Park, Sector 30A, Opp. Sanpada
Railway Stn., Vashi, Navi Mumbai- 400703
T: +91 (0) 2249746788
[email protected]  /  [email protected]

GOODWE (Italy)

Via Cesare Braico 61, 72100 Brindisi, Italy
T: +39 338 879 38 81; +39 831 162 35 52
[email protected] (sales)
[email protected]; [email protected] (service)

GOODWE (Turkey)

Adalet Mah. Megapol Tower K: 9 No: 110 Bayrakl

ı

 - Izmir

T: +90 (232) 935 68 18
[email protected]
[email protected]

GOODWE (Australia)

Level 14, 380 St. Kilda Road, Melbourne,
Victoria, 3004, Australia
T: +61 (0) 3 9918 3905
[email protected]  /  [email protected]

GOODWE (Mexico)

Oswaldo Sanchez Norte 3615, Col. Hidalgo, Monterrey,
Nuevo Leon, Mexico, C.P. 64290
T: +52 1 81 2871 2871
[email protected] / [email protected]

GOODWE (Korea)

8F Invest Korea Plaza, 7 Heoleung-ro
Seocho-gu Seoul Korea (06792)
T: 82 (2) 3497 1066
[email protected] / [email protected]

GOODWE (China)

No. 90 Zijin Rd., New District, Suzhou, 215011, China
T: +86 (0) 512 6958 2201
[email protected] (sales)
[email protected] (service)

340-00432-01

Rev 1.1

2020-11-11

Summary of Contents for Grid-Tie HT Series




















Reviews: