Go Rhino dominator d2 series Installation Instructions Download

Page: 1 / 4

QTY

PARTS DESCRIPTION

5/16” U-NUTS

5/16” X1” HEX BOLTS

5/16” LOCK WASHERS

5/16” FLAT WASHERS

3/8” x 1 “ HEX BOLTS

3/8” LOCK WASHERS

QTY

PARTS DESCRIPTION

3/8” FLAT WASHERS

3/8” HEX NUTS

C07P PASSENGER MOUNTING BRACKETS

C07D DRIVER MOUNTING BRACKETS

D24041P PASSENGER SIDESTEP

D24041D DRIVER SIDESTEP

INSTALLATION INSTRUCTIONS

STEP 1.

Read the instructions completely before you begin the installation.

If the vehicle is equipped with factory running boards, remove the fasteners and

running boards

DOMINATOR 2 SERIES SIDESTEPS

ASSEMBLY & INSTALLATION INSTRUCTIONS FOR

PART NO. D24041

07-12 CHEVY/GMC 1500 EXTENDED CAB PICKUP 2/4WD

07-10 CHVEY/GMC 2500HD, 3500 4DR EXTENDED CAB 2/4WD

11-12 CHEVY/GMC 2500HD, 3500HD 4DR EXTENDED CAB P/U 2/4WD (Gasoline only)

Summary of Contents for dominator d2 series

Page 2: ...tely 14 and Locate the single hole in the body pinch mold and the two holes in the rocker panel STEP 3 Remove the plastic plug from the rocker panel and install 1 5 16 U NUT as shown PLASTIC PLUG 3 8 X 1 HEX BOLT FLAT WASHER LOCK WASHER HEX NUT 5 16 X 1 HEX BOLT LOCK WASHER FLAT WASHER INSTALLED 5 16 U NUT BRACKET MOUNTING POINTS C07P MOUNTING BRACKET PINCH MOLD ROCKER PANEL ...

Page 4: ...STEP 7 Tighten all mounting bracket and sidestep nuts and bolts STEP 8 Repeat the above steps to install the driver side mounting brackets and sidestep ...