background image

1

User manual Athens/China C360,C365 English

Gigaset C360/C365

C365 base station                       

(part of answering machine at a glance)

1 Registration/Paging key: 

Page handsets (press briefly, "Paging", page 7).

Register handsets (press and hold, page 7).

2 On/Off key: activate and deactivate answering 

machine.

Lights up: answering machine is activated.

Flashes: there is at least one new message or 

message is in the process of being recorded.

Flickers for about four seconds: memory is full.

During message playback: 

3 Delete current message. 
4 Skip to previous message.
5 Adjust volume (

ð

 = quieter; 

ñ

 = louder):

During message playback: adjust volume.

While an external call is being signalled: adjust 

ringtone volume.

6 Playback/stop key:

Play back messages from the answering ma-

chine, or cancel playback. 

7 Skip to next message.

Please note:

If the answering machine is being operated 

from a handset or if it is recording a message, it 

cannot be operated from the base station.

If the On/Off key flashes although the answer-

ing machine is switched off, it means that there 

is still at least one new message that has not 

been played back yet. 

2

11.12.

11:56

INT

MENU

1 Charge status of the

battery pack

2 Internal number 

of the handset

3 Display  keys
4 Message  key
5 Handsfree key
6 Control key
7 Directory  key
8 Talk key
9 End call and 

On/Off key

10 Ringtone on/off (press 

and hold in idle status)

11 Key lock on/off

(press and hold)

12 Recall key

- Confer (flash)

- Dialling pause

(press and hold)

13 Microphone
14 Alarm clock key

C360 Base station

(no answering machine)

Display keys:

Pressing the keys launches whichever function 

that appears above them in the display.

Display 

icon

Function when pressed

INT

Call all registered handsets.

MENU

Open main/submenu 

(see Menu tree, page 10).

“ 

Go back one menu level.

U

Scroll up/down or adjust volume 

with 

u

.

Move cursor to left/right with 

u

.

˜

Backspace deletes one character at 

a time. 

OK

Confirm menu function or save 

entry.

10

2

3

5

7

4

6

8
9

12

1

 

Regestration/Paging key

               (page7/8)

Handset C36H

11

13

14

3

7

6

1

5

4

2

Summary of Contents for Gigaset C360












Reviews: