![background image](http://html.mh-extra.com/html/general-pipe-cleaners/hot-shot-320/hot-shot-320_operating-instructions_2210590001.webp)
General Hot-Shot
™
Operating Instructions
Model 320
(For use with Copper and Iron Pipe)
Y
our Hot-Shot is designed to give you
years of trouble-free, profitable service.
However, no machine is better than its
operator. We therefore suggest you read
these instructions through carefully before
using your machine on the job. This will
enable you to operate the Hot-Shot more
efficiently and more profitably. Failure to
follow these instructions may cause
personal injury to operator or damage to
equipment.
SAVE THESE INSTRUCTIONS!
B
efore
connecting the cables
. Make both
pipe
connections
before
plugging
unit
into
receptacle.
Make sure all connections are tight to
prevent arcing
at the clamps.
Loose connections also
get hot and reduce current flow. Caution: Uncoil
the cables.
Do not leave any cable coiled up or
placed on steel
objects as the heating in the pipe will be
reduced.